Activated Alumina Desiccant

Molecular Sieve for High Voltage Switch
January 26, 2017
Defluorination Activated Alumina
January 26, 2017

Activated Alumina Desiccant

  Is a high-surface-area, highly porous form of aluminum oxide. It can adsorb gases and liquids without changing its form. It works as a desiccant through adsorption. As air passes through the alumina, the water in the air sticks it and becomes trapped and air that passes through an activated alumina filter is dried out. Even if immersed in a liquid, Activated Alumina Desiccant won't fall apart or soften. You can restore the original adsorption efficiency of activated alumina by heating it to any temperature from 350° to 600°F (177° to 316°C). When the desiccant is heated as described above, the water stored in it is released. This means that filters with Activated Alumina Desiccant can be reused over and over again.

Widely used in iron and steel, textiles, electronics industry, oil cracking gas, PVC, acrylic casing in dry gas, liquid depth and purifying agent, pressure swing adsorption of air separation industry desiccant, etc. Activated Alumina Desiccant can dry almost all liquids and gases. To achieve efficient storage, transportation, and processing of fluid, it's often necessary to remove water.
Formula :ALB2BOB3B
Technical Parameter :
Item 3-5mmSphere 4-6mmSphere
Bulk density (g/ml) ≥0.70 ≥0.68
Surface area sqm/g 260-300 260-300
Pore volume ml/g 0.38-0.42 0.38-0.42
Static adsorption (RH=60%) 16-18 16-18
Crushing strength N/P ≥90 ≥120
Abrasion (%) ≤0.40 ≤0.40
This product can control the dew point to -70℃.

Packing:
  150kg steel drums.

Other types of Activated Alumina :
  Type Y catalytic active alumina ,can be used as catalyst carrier of catalyst itself.
  X-P active alumina can be used as de fluoride in water process ,fluoride removal capacity can reach to 2.1mg/g.
  X-P-Y active alumina for dioxide hydrogen purification.
  XP Active alumina for oil purification.